Wanted:

Hardware

Where appropriate it needs to be linux compatible:

• Ultra portable sub-notebook. "redundant" technology welcomed.
• Monitor cable for Acer Travelmate 313T laptop: 50.42B02.001 Rev 4 Titanium TFT8.4" 0400
• Tough box: to carry my sub-notebok in at least 24x18x5cm, max. 30x23x6cm
• USB extensions and hubs,
• ZD1201 based USB wireless adapters,
• 1gb Iomega Jaz cartridges,
• Laptop Security Cable,
• USB to IDE adapters,
• ADSL routers and network adapters,
• Male-Male VGA cables,
• 3.5" to 2.5" IDE adapters/ cables,
• Slot 1 CPU faster than PIII 800mhz,
• PCMCIA or USB SCSI adapter,
• PCMCIA or USB Serial adapter 57600bps capable or better,
• PCMCIA or USB CD-ROM drive that doesn't require external PSU (bus powered),
• PCMCIA or USB network adapters.
• Compaq voltage regulator P.N. 299306-001,
• Compaq voltage regulator P.N. 225529-001,
• USB extension cables,
• Compact Laptop PSU: 97mm x 25mm x 48mm or smaller. 16v 2.5A or there abouts.
• PCI or ISA PCMCIA bridge,
• Wireless Network Hardware (serial/ 802.11/ nics/ bridges/ AP's/ Antenna/ Cables and pigtails/ whatever),
• 72-pin standard (for 486's and low end pentiums) simm pairs 32mb or larger,
• 30-pin simms 4mb or larger. Mac/ Sun Sparc 1+ compatible,
• 144-pin SDRAM SO DIMMs, DIMMS, compact flash and smartmedia of any size or speed.
• Portable battery powered serial modem,
• Portable acoustic coupler,
• Mini Hub/ Switch,
• Phone system, two or more lines with POTS connections,
• Floppy Drive for Digital ct475 laptops,
• Nokia 2110,
• Mobile Phones (Ideally ready for UK networks),
• Charger (or even spec: voltage/polarity) for Nokia 8110,

Software

• GatorSystem, GatorPrint or GatorShare for Cayman GatorBox CS.

Media

Books

• "Sex and Rockets" by John Carter and Robert Anton Wilson,

Bike Bits

• Specialized Rockhopper MTN 2002 Dropout Hanger 989-4265,
• 33.2/3/4mm Diameter seatpost 60cm or longer or shims to match.

Offered:

I have a hugely random selection of computers cables and peripherals, below is a small random sample:

• Acer 313T spare parts. Everything but printed monitor lead.
• Mac SE with broken (*very* NOISY) fan,
• Mac 12" monochrome display,
• Apple NuBus 820-0600 24-bit display card,
• Apple NuBus 630-0153 display card,
• Daynaport E/11-T NuBus Ethernet card,
• 5x Apple AAUI BNC ethernet transceivers,
• 2x Dayna AAUI rj45 ethernet transceivers,
• SyQuest Model: EZ230S floptical drive untested,
• SyQuest Model: EZ135S floptical drive untested,
• SyQuest Model: IMP5V2SS PSU for either of above,
• Sun Type 5c keyboard,
• Intel EtherExpress Pro/100 EISA network card (82556),
• Compaq ATI rage pro turbo AGP graphics card, untested,
• PCMCIA CD-ROM drive: Addonics Technologies Pocket CD-II (requires external PSU (supplied)),
• Digital NETset, like lego for networks,
• 2x Heavy Duty Monitor arms,
• Amiga A500,
• 7x 1mb HP Vectra DRAM (5063-4519),
• Commodore 64 1530 datassette in c2n box,
• Compaq Deskpro 2000; p166, USB, 3xISA, 3xPCI, 3 DIMM slots
• Compaq Professional Workstation 5100. untested: unknown DIMM type,
• 2x Slot 1 pII 300 processors (80522PX300512EC SL2HA) for above,
• Compaq voltage regulator P.N. 299306-001 for above,
• Slot 1 pII 333 processor (B80523P333512E SL2QF)
• Slot 1 pII 400 processor (400/512/100/2.0 S1 SL3EE)
• Slot 1 pIII 533 processor (533B/512/133/2.0 S1 SL3BN)
• Slot 1 pIII 550 processor (550/512/100/2.0 S1 SL3F7)
• 1x pentium pro 200 processors (KB80521EX200 SY040 256K),
• 2x pentium pro 200 processors (KB80521EX200 SL22V 256K),
• Compaq voltage regulator P.N. 225529-001 for above,
• AMD K2-500mhz, AT case, Motherboard w/Sound, USB & AGP gfx, 3xDIMM slots, 3xPCI, 2xISA.
• 3x Tellabs 81.0256 19" chassis, each with 1x 812581 Master Canceller,
• Partially stripped IBM 755Cs, condition unknown,
• Playsation 2 console, probably broken,
• Compaq Proliant 1850R racmount Server 1x600mhz CPU dual CPU capable,
• 3com ISDN Lan Modem 3c891,
• 2x 4m Cat. 5 patch cable sealed bag,
• Various Length patch cables,
• Broken IBM Deskstar HD 20.5gb DPTA-372050
• 1gb Iomega Jaz Cartridge, probably broken,
• Internal Iomega 2gb Jaz Drive, untested apart from above,
• External Iomega 1gb Jaz Drive, untested,
• Samsung SP-R5100 Digital Cordless Phone.

DIY

• B&Q 25mm Diameter Chrome Plated Tube, 34.8cm offcut from 1.22m,
• B&Q White Style Worktop Corner Joint 42.7cm offcut from 30mmx630mm,
• B&Q White Style Worktop End cap 19.5cm offcut from 30mmx630mm,
• B&Q Pine Stripwood 112.5 x 2 x 3.6,
• Matt silver/ Metallic Venetian blind 140cm wide & 180cm high,
• Unibond white kitchen sealant cartridge half used,
• Hitachi 790 Hoover unit, no power cord and untested.

Bike Bits

• Folding Bike,
• Wellgo platform pedals,
• Bike rack held together with jubilee clips and metal epoxy,
• 28.6mm and 31.8mm collar adapters for 34.9mm Alivio front derailleur FD-M510,
• Acera Rear Derailleur,
• Very worn 34.9mm front Derailleur,
• Kinex Road Bottom Bracket came with Triple Ring from Decathlon,
• 2x *bent* Specialized Rockhopper MTN 2002 Dropout Hanger 989-4265.

Currency, Vouchers etc:

• 100 Euros,
• 330 Polish Zloty,
• 20 Canadian Dollars, >

Available for Loan:

Things I hoard but use irregularly:

• Black&Decker BD 190E sander,
• 3x Camera Tripods; one spidery, one medium, one heavy duty,
• Foam Carry matt 175x49x1.1cm silver on one side black the other yellow and cyan core,
• "Quechua Self Inflating" Compact Carry matt 170x50 tapering to 40cm, Red on one side black the other,
• 4 Foot tall silver "Inflatable Movie Dalek",
• Lifeventure large (62x110cm) soft fibre trek towel,
• Nikkai 300W DC to AC inverter,
• Philips Onis 6816 DECT/GAP handset with POTS base station and spare charger.
• 1.5m SCSI-II (sun workstation style) cable,
• White 1.5m USB A to B cable, came with NTL:250 cable modem,
• Parallel port floppy drive from Acer 313T,
• Nokia Phone charger 3.7V DC 355mA,
• 2x Nokia Phone charger 5.3V DC 500mA,
• Nokia Phone charger 5.7V DC 800mA,
• Nokia dlr3p data cable.
• 5m VGA Cable.

Media

• "Flower in my pedal" DVD by Andrea Dorfman.
• "The Watchman" book by Jon Littman.